Troubleshooting - Plantronics CT10 User Manual

TROUBLESHOOTING

THE REMOTE DOES NOT RING
Make sure that the Ringer
Ensure that the Telephone Cord
are installed correctly.
Recharge the Remote Battery
Remote Charging Well
Disconnect the AC Adapter from the power source and
reconnect it in a known good outlet.
Use the Remote
I CANNOT HEAR A DIAL TONE
Make sure your Remote Rechargeable Battery
securely seated in the Charging Well
charged. The Battery may need to be charged for 8
hours prior to first use.
Check that all cords are correctly connected and firmly in
place.
Adjust the Dual Function Receive Volume Control Key
up to increase the volume.
Make sure the Remote is within range of the Base.
Separate and then reconnect the Rechargeable Battery
and Remote .
Return the Remote to the Charging Well
to re-establish a communication link.
is "On".
and the AC Adapter
by firmly placing it in the
.
in an area closer to the Base
14
.
is
and/or fully
for 5 seconds
A
E
G
E
A
G
C
E