Advertisement
1. SECURITY TIPS
WARNING!!! To reduce the risk of fire, electric shock, or
injury to persons, follow these important safety instructions:
This device for indoor use only，the protection grade is: IP20
Installing of the light must keep a distance with any flammable objects by 5m at
least. The distance between the light and the projected objects must be no less
than 1m.
Please never directly install the light on the surface of the flammable objects.
The installation、operation and maintenance must be managed by the qualified
professional, and make sure to operate it under the instruction of the Manual.
Make sure the work environment temperature of the light maximum 35℃, and
minimum -20℃
The temperature of the light surface will up to 60℃ even under the normal
cooling, so never touch it by hand.
The light was designed by electric shock protection type, and must connect to the
power supply system which well earthed. Furthermore, the ground wire of the
light must connect to the ground wire of the power supply system, ground wire
interface of the light must well connect with the light body (or light must be well
earthed)
Please check if the voltage is in accordance with the rated power before
installing.
Please never use the power cable which was damaged the insulation cover,
meanwhile, never put the power cable on any other wire. Please pull out the
power cable by handle the plug when light is stop working or cleaning, never
pull out it roughly or handle the wire directly.
The light doesn't include any spare parts for repairing , please check if all the
parts are well installed and screws are drove tightly before operating. It's
prohibited to use the light when the cover is opened.
No tic e: Pl ea se ma ke s u re it is po w e r o ff b ef o re a ny i n sta l la t io n,
re pa i r a n d c lea n
www.leahualight.com
1
Advertisement
