Acura MDX 2018 Navigation Manual page 59

■
Switching Display Mode Manually
Set the screen brightness separately for Day and Night modes. Press the
(Display mode) button to cycle through the display modes (Day to Night to Off).
Illumination Priority
(Display 1
Mode) button
Sunlight sensor (see 2
your Owner's
Manual for location)
1. Press the
button.
u The Brightness bar is displayed
for a few seconds.
u Rotate
brightness. Press
2. Press the
button again.
u Repeat the procedure to switch
the display modes.
Operation
Selects Day, Night, or Off display mode. This
button has the highest priority and overrides all
other display control adjustments listed below.
Remember: Once you press this button, you
assume full manual control of the display mode
until the power mode is set to VEHICLE OFF
(LOCK).
If the sunlight sensor detects daylight and the
headlights are turned on, the system
automatically overrides the Night display and
displays the Day display mode.
Remember: If desired, use the
Mode) button to override this automatic choice.
1 Switching Display Mode Manually
A visual guide helps you see the difference between
Day and Night modes.
2 Day or Night Mode P. 9
(Display mode)
to adjust the
.
(Display mode)
(Display
Continued
uuMapuColor
57