BMW M2 Coupe Owner's Manual page 113

Switching on
With radio-ready state switched off, press the
lever either up or down past the resistance
point.
Switching off
Press the lever back into the standard position.
Welcome lamps and
headlamp courtesy delay
feature
Welcome lamps
General information
Depending on the vehicle equipment and the
ambient brightness, individual light functions
may be switched on briefly when the vehicle is
unlocked.
Activating/deactivating
Position of switch:
Using iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Lighting"
4. "Exterior lighting"
5. "Welcome lights"
The setting is stored for the driver profile cur‐
rently used.
,
Online Edition for Part no. 01402981836 - VI/17
Lights
Headlight courtesy delay feature
General information
The low beams stay illuminated for a particular
time if the high beams are switched on after
radio-ready state is switched off.
Setting the duration
Using iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Lighting"
4. "Exterior lighting"
5. "Pathway lighting"
6. Set length of time.
The setting is stored for the driver profile cur‐
rently used.
Automatic headlight control
Concept
The low beams are switched on and off auto‐
matically depending on the ambient bright‐
ness, for instance in tunnels, in twilight or if
there is precipitation.
General information
A blue sky with the sun low on the horizon can
cause the lights to be switched on.
When emerging from a tunnel during the day,
the low beams are not switched off immedi‐
ately but instead only after approx. 2 minutes.
Activating
Position of switch:
The indicator light in the instrument cluster is
illuminated when the low beams are switched
on.
Controls
113