Registering Magic Motion Remote Control; How To Use Magic Motion Remote Control; Precautions To Take When Using The Magic Motion Remote Control - LG 42PM4700 Owner's Manual

Registering Magic Motion Remote
Control
The Magic Motion Remote Control operates by
pairing with your TV.
Register the Magic Motion Remote Control to use
it.
How to register the Magic Motion Remote
Control
To register the remote control,
press the WHEEL button on the
remote control while aiming it at
your TV.
How to Re-register the Magic Motion Remote
Control after Registration Failure
Reset the remote control by
pressing and holding both the
BACK and HOME buttons for
5 seconds. (Once the reset is
complete, the light on the Pointer
blinks.) Then repeat the above
procedure to register the remote
control.
How to use Magic Motion Remote
Control
1
Press WHEEL button if there
is no pointer on your TV
screen. The pointer will then
appear on the screen.
»
If the pointer has not been
used for a certain period of
time, it will disappear.
2
You can move the pointer by
aiming the Pointer Receiver of
the remote control at your TV
then move it left, right, up or
down.
»
If the pointer does not
work properly after clicking
the WHEEL button, leave
the remote control for 10
seconds then use it again.
Precautions to Take when Using
the Magic Motion Remote Control
Use the remote control within the maximum
communication distance (10 m, 32.8ft).
Using the remote control beyond this
distance, or with an object obstructing it,
may cause a communication failure.
A communication failure may occur due to
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as this will use the
same bandwidth (2.4 GHz) as the Magic
Motion Remote Control.
The Magic Motion Remote Control may be
damaged or may malfunction if it is dropped
or receives a heavy impact.
Take care not to bump into nearby furniture
or other people when using the Magic
Motion Remote Control.
Manufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
It is recommended that an Access Point (AP)
be located more than 1 m (3.28 ft) away
from the TV. If the AP is installed closer
than 1 m (3.28 ft), the magic motion remote
control may not perform as expected due to
frequency interference.
35
REMOTE CONTROL