Registering Magic Remote Control - LG PH47 Series Owner's Manual

22
MAGIC REMOTE CONTROL FUNCTIONS
Registering Magic Remote
Control
It is necessary to 'pair' (register) the magic remote
control to your TV before it will work.
How to register the Magic Remote Control
BACK HOME
1 To register automatically,
turn the TV on and press the
Wheel(OK) button. When
registration is completed, the
completion message appears
P
on the screen.
2 If registration fails, turn the TV
off and back on, then press
the Wheel(OK) button to
MY APPS
complete registration.
How to re-register the Magic Remote Control
1 Press and hold the BACK
and SMART
BACK
together for 5 seconds to
reset, then register it by
SMART
following "How to register the
Magic Remote Control" above.
2 To re-register the Magic
Remote Control, press and
hold the BACK
seconds toward the TV. When
registration is completed, the
completion message appears
on the screen.
How to use Magic Remote
Control
1 If the pointer disappears, move
the remote control slightly
to left or right. Then, it will
automatically appear on the
screen.
» If the pointer has not been
used for a certain period of
time, it will disappear.
2 You can move the pointer by
aiming the Pointer Receiver of
the remote control at your TV
then move it left, right, up or
down.
» If the pointer does not work
properly, leave the remote
control for 10 seconds then
use it again.
If you press Wheel(OK) on the Magic
Remote Control, the following screen
1
appears.
Shows information about the current
programme and screen.
2
You can select My Apps Menu.
buttons
Precautions to Take when
Using the Magic Remote
Control
y Use the remote control within the maximum
button for 5
communication distance (10 m). Using the
remote control beyond this distance, or
with an object obstructing it, may cause a
communication failure.
y A communication failure may occur due to
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as these use the
same bandwidth (2.4 GHz) as the Magic
Remote Control.
y The Magic Remote Control may be damaged
or may malfunction if it is dropped or receives
a heavy impact.
y Take care not to bump into nearby furniture
or other people when using the Magic
Remote Control.
y Manufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
y It is recommended that an Access Point (AP)
be located more than 1 m away from the
TV. If the AP is installed closer than 1 m, the
Magic Remote Control may not perform as
expected due to frequency interference.
11
-1 Brief Info Title Test...
More
Info.