AMC X7i Instructions For Installation And Operation Manual page 10

1.ON
When X7i in standby mode, press this
button to switch X7i into operation
mode.
2.STANDBY
When X7i in operation mode, press
this button to switch X7i into standby
mode.
3.SOURCES
The keys in the sources group allow
you to select the input sources
bewtten CD, FM/AM, TAPE, AUX
(iPod) and PHONO.
4.VOLUME +/-
Control the sound level up or down.
5.FM AM
MODE
This button selects TUNE PRESET
buttons in tuning mode or preset
mode. "PRESET" light up in display
when in preset mode.
TUNE PRESET
Tuning up or down of tuning mode or
preset mode.
During tuning mode, press up or down
button for a while, X7i will search next
radio station automatically.
STEREO MONO
Switch FM station into stereo or mono
mode.
MEMORY
Same function as panel "MEMORY"
button.
6.NUMERIC BUTTONS (0- 9)
NOTE: These 0 ~ 9 buttons initial is
AMC Receiver X7i codes.
Pressing "CD" in "SOURCES" group
or any key in "CD" group, 0 ~ 9 is
changed to XCDi codes and keep it
until any key of "SOURCES" group or
any key in " FM AM" group is pressed
then 0 ~ 9 is changed back to initial
AMC Receiver X7i codes.
These numeric buttons allow directly
access of desired tuner preset. Upon
entry of the desired preset number,
the receiver tuner shifts to the radio
station stored in preset.
7.MUTE
Pressing the "Mute" button will apply
full mute to the audio. This funcation
can be used as a "local off" and will not
affect other rooms.
8.Other buttons
Buttons on the RC-S2 remote control
that are not mentiond above, are for
use on other AMC high end
Audio/Video products.
10