CAUTION R300 Lumic • Always use set voltage. (DC 10-18V) • If any of the following conditions occurs, unplug the power cord from the DC outlet, • All operating instructions must be read and and request a quali ed service person to understood before the product is operated.
• Setting up the R300 Lumic The R300 Lumic features a ¼“ 20 threading (see page 5 where it is located) to mount it onto lightstands with a ¼“ 20 screw. Alternatively the optional 15mm LWS rail mount can be used to attach the ring light to a rail support system.
MAINTENANCE R300 Lumic • Faceplate Dusting Dust the unit with a soft cloth or chamois. You may use a slightly damp cloth, but make sure unit is not connected to any power. Dry or abrasive cloths may cause electrostatic charge on the surface,attracting dust particles.