Planet WAP-4060PE User Manual page 87

set wirelessmode
set 80211d
set http
set HttpPort
set https
set HttpsPort
set syslog
set syslogSeverity
set syslogServer
set manageOnlyLan
set roguedetect
set rogueinteval
set rogueband
set roguetype
set roguesnmp
set roguelegal
set autoConfig
set autoResponse
set autoChan-
geName
set autoSetResp
set autoUpdate
set autoUpgradeOnly
set autoUpdateInter-
val
set ftpServer
set fwPathname
set ftpLogin
set ftpPassword
Set Wireless LAN Mode
Set 802.11d mode
Set http Enable/Disable
Set http port number
Set https Enable/Disable
Set https port number
Set syslog Disable/Broadcast/Unicast
Set syslog Severity level
Set unicast syslog server IP/name
Set Management only via LAN Enable/Disable
Set Rogue AP Detection Enable/Disable
Set Minutes of every Rogue AP Detection(Range: 3 ~ 99)
Set Rogue AP Detection band(s)
Set Rogue AP definition
Set Rogue AP Detection SNMP Trap Enable/Disable
Add/Delete one AP MAC/OUI into/from Rogue AP Legal
List
Set Auto Config Enable/Disable
Set Respond to Auto Config request Enable/Disable
Set provide admin login name and password
Enable/Disable
Set Provide respond to Auto Config request Enable/Disable
Set Auto Update Enable/Disable
Set Install later version only Enable/Disable
Set Auto Update Interval(1~31days)
Set FTP Server address
Set Firmware Pathname
Set FTP Login Name
Set FTP Password
82