Instructions For Replacing The Lamps; Beauty Light Lamps - BEAUTY ANGEL CVT 32 Operating Instructions Manual

Cleaning and maintenance
36/52
5.8

Instructions for replacing the lamps

The lamp effect decreases over the course of time. As such, the replacement
intervals specified in the maintenance plan must be adhered to.
DANGER!
Danger of burns from hot lamps and surfaces!
Finger and hands may get burned when replacing lamps.
– Before carrying out maintenance work, wait until the
device has cooled down sufficiently.
NOTICE:
Small quantities of mercury can escape if the bulb/lamp
glass breaks!
Please comply with the following instructions:

Immediately disconnect the device from the
mains power.

Children must leave the room immediately.

Ventilate the room for at least 15 minutes.

Put on disposable gloves.

With the window open: Collect the glass shards and
escaped mercury in a sealable container.

Bring the container to a collection site for waste lamps.
5.8.1

Beauty Light lamps

Replace faulty lamps immediately.

Always replace the entire set of lamps after the specified operating time.

– Turn 90° and carefully remove from the socket.
– Push the pins vertically into the socket from above.