Storing Your Own Sound Adjustments - JVC KD-S73R Instructions Manual

Indication For:
SCM OFF (Flat sound)
BEAT Rock or
disco music
SOFT Quiet
background
music
POP Light music
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see "Storing your own sound adjustments"
below.
• To adjust the bass and treble reinforcement levels
or to turn on/off the loudness function, see page 20.
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Call up the sound mode you want to
adjust.
SCM
• See page 20 for details.
2
Select "BAS" (bass), "TRE" (treble),
or "LOUD" (loudness).
SEL
Preset values
BAS TRE LOUD
00 00 OFF
+02 00 ON
+01 –03 OFF
+04 +01 OFF
3
Adjust the bass or treble, or turn the
loudness function on/off (LOUD ON/
LOUD OFF).
4
Repeat steps 2 and 3 to adjust the
other items.
5
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
SCM
Your adjustment made for the
selected sound mode is stored
in memory.
6
Repeat the same procedure to store
other sound modes.
To reset each sound mode to the factory
settings, repeat the same procedure and
reassign the preset values listed in the table on
the left column.
21