Timing Requirement - Philips 221P3LPYES/00 Service Manual

3.2.3 DP Cable (for 221P3LPY)
The input signals are applied to the display through DP cable.
Length
Connector type
Pin Assignment:
Pin
1
2
3
4
5
6
7
8
9
10

3.3 Timing Requirement

Factory Preset Mode Definition:
a. Perfect FOS while presenting those timings.
b. Will specify those timing in User's Manual
Preset Mode Definition
a. Need to support those timings
b. Perfect FOS after auto adjustment.
User Mode
a. Can save those timing that not in Preset mode and can be showed (not over scaler or Panel spec.)
b. It needs to reserve the 10 timings space in memory size.
3.3.1 Mode Storing Capacity
Factory preset modes
User modes
User modes
3.3.2 Factory Preset Modes (D-SUB 15 modes)
1. Factory modes and preset modes are defined in the enclosed timing table file
: 1.8 M +/- 50 mm
: DP male with DDC-2B pin assignments
White connector thumb-operated jackscrews
With transplant pin protective cover.
Signal Assignment
ML_Lane 3(n)
Ground
ML_Lane 3(p)
ML_Lane 2(n)
Ground
ML_Lane 2(p)
ML_Lane 1(n)
Ground
ML_Lane 1(p)
ML_Lane 0(n)
: 15
: 41
: 10
Pin Signal Assignment
11 Ground
12 ML_Lane 0(p)
13 Ground
14 Ground
15 AUX_CH (P)
16 Ground
17 AUX_CH (N)
18 Hot Plug Detect
19 Return DP_PWR
20 DP_PWR
Meridian 3 105