Interface - Philips 221P3LPYES/00 Service Manual

104 Meridian 3

3.2 Interface

3.2.1 D-Sub Cable
Length
Connector type : D-Sub male with DDC2B pin assignments.
Pin assignments:
Pin
1
2
3
4
5
6
7
8
3.2.2 DVI Cable
The input signals are applied to the display through DVI-D cable.
Length
Connector type
Pin Assignment:
Pin
1
2
3
4
5
6
7
8
9
10
11
12
: 1.8 M +/- 50 mm
Fix with monitor when packing, with transplant pin protective cover.
Blue connector thumb-operated jack screws
Signal Assignment
Red
Green / SOG
Blue
Sense (GND)
Cable Detected (GND)
Red GND
Green GND
Blue GND
: 1.8 M +/- 50 mm
: DVI-D male with DDC-2B pin assignments
White connector thumb-operated jackscrews
With transplant pin protective cover.
Signal Assignment
T.M.D.S. data2-
T.M.D.S. data2+
T.M.D.S. data2 shield
No Connect
No Connect
DDC clock
DDC data
No Connect
T.M.D.S. data1-
T.M.D.S. data1+
T.M.D.S. data1 shield
No Connect
Pin Signal Assignment
9 DDC +3.3V or +5V
10 Logic GND
11 Sense (GND)
12 Bi-directional data
13 H /H+V sync
14 V-sync
15 Data clock
Pin Signal Assignment
13 No Connect
14 +5V Power
15 Ground (for +5V)
16 Hot plug detect
17 T.M.D.S. data0-
18 T.M.D.S. data0+
19 T.M.D.S. data0 shield
20 No Connect
21 No Connect
22 T.M.D.S clock shield
23 T.M.D.S. clock+
24 T.M.D.S. clock-