Table of Contents
Advertisement
Getting Started
Important: make sure all relevent equipment is connected properly before
connecting the unit to a wall power socket and turning on the power.
Powering the TV
To turn the power ON or OFF:
•
Plug the power cord into a suitable power point, then turn the power on at the outlet.
•
Press the POWER/STANDBY button on the right lower side of the back panel (or on the
remote control, making sure to aim it at the sensor at the front of the TV); the indicator
will glow green. Press it again to power off (standby mode), and the indicator will glow
red.
First Use
When you switch on the TV for the first time, the First Time Setup menu will be displayed on the
screen, as illustrated below.
•
Language: use the / buttons to select your OSD (on screen display) language, then use
the ▼ button to go to the next item.
•
Country: use the ◄/► buttons to select the country you are living in, then use the ▼
button to go to the next item.
•
Time Zone: use the ◄/► buttons to select the time zone you are living in, then use the ▼
button to go to the next item.
Tune Type: use the ◄/► buttons to select the type of scan, then use the ▼ button to go
•
to the next item.
•
Press the OK button to begin scanning for stations.
•
To exit channel tuning, press the MENU or the EXIT button, then use the ◄/► buttons to
select YES. Select NO to continue tuning.
•
When auto-searching is complete, your TV will display the first channel located.
11
Hide quick links:
Advertisement
Table of Contents
