Switching On The Hob; Selecting/Changing The Power Level; Switching Off; Residual Heat Indicator - Miele KM 6322 Operating And Installation Instructions


Fire hazard.
Do not leave the hob unattended
whilst it is being used.
Please note that the heating up time
on induction hobs is very much
shorter than on conventional hobs.

Switching on the hob

 Touch the  sensor.
 will appear in each of the cooking
zone displays. If there is no further
input, the hob will switch itself off after
a few seconds for safety reasons.
Selecting/changing the power
level
 Touch the sensor for selecting the
cooking zone you want briefly.
 or the selected power level will flash
in the cooking zone display.
 Touch the appropriate number sensor
for the power level you want.
The power level selected will flash in the
display for a few seconds to start with
and then light up constantly.

Switching off

 To switch a cooking zone off, touch
the sensor for that cooking zone
twice.
 To switch off the hob and all the
cooking zones, touch the  sensor.

Residual heat indicator

If the cooking zone is still hot, the
residual heat indicator will light up after
it has been switched off.
The lines of the residual heat indicator
go out one after another as the cooking
zone cools down. The last horizontal
line only goes out when the cooking
zone is safe to touch.
The residual heat indicators will flash if
there is a power cut during use or
while residual heat is still present or if
you have opened the programming
function while residual heat is still
present.

Danger of burning. Do not touch
the cooking zones whilst the residual
heat indicators are lit up.
Operation
27