Blind Spot Detection System (Bsd); Bsd (Blind Spot Detection); Lca (Lane Change Assist); Rcta (Rear Cross Traffic Alert - Kia Niro 2018 Owner's Manual

Hide thumbs Also See for Niro 2018:
Table of Contents

Advertisement

Driving your vehicle
BLIND SPOT DETECTION SYSTEM (BSD) (IF EQUIPPED)
The Blind Spot Detection System
(BSD) uses a radar sensor to alert
the driver.
It senses toward the rear sides of the
vehicle and provides and early warn-
ing to the driver.
6
66

(1) BSD (Blind Spot Detection)

The warning range depends on
your vehicle speed. However, if
your vehicle is about 10 km/h (6
mph) faster than the other vehi-
cle, the system will not warn you.

(2) LCA (Lane Change Assist)

When a vehicle approaches you at
high speed, the system will warn
you. The driver may notice differ-
ent warning distances depending
on other vehicle's speed.

(3) RCTA (Rear Cross Traffic Alert)

When your vehicle moves rear-
ward, and the sensor detects an
ODE056063L
approaching vehicle in the left or
right side, the system will warn
you. The driver may notice differ-
ent warning distances depending
on other vehicle's speed.
WARNING
- BSD
Limitations
• The Blind Spot Detection
System (BSD) is a supplemen-
tal system. Do not solely rely
on the system and always pay
attention to drive safely.
• The Blind Spot Detection
System may not detect every
object alongside the vehicle
and is not a substitute for
proper and safe lane chang-
ing procedures. Always drive
safely and use caution when
changing lanes.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents