Table of Contents
Advertisement
2.2.1
iSCSI Boot Configuration
Copyright(c) 2003-2014 Intel Corporation. All rights reserved.
Use the Up/Down arrow key to select an item and press <spacebar> to change between
Enabled [ * ] or Disabled [ ].
[ * ] Use dynamic IP configuration (DHCP)
When Enabled [ * ], the iSCSI boot host software acquires the IP address from the DHCP
server.
When Disabled [ ], the iSCSI boot host software acquires the static IP address. Key in the
necessary parameters.
[ * ] Use DHCP for iSCSI target information
When Enabled [ * ], the iSCSI boot host software acquires its iSCSI target parameters from
the DHCP server.
When Disabled [ ], the iSCSI boot host software acquires its iSCSI target parameters via the
static IP address. Key in the necessary parameters.
2-4
Intel(R) iSCSI Remote Boot v3.0.84
iSCSI Boot Configuration
[ * ] Use dynamic IP configuration (DHCP)
Initiator Name:
Initiaor IP:
Subnet Mask:
Gateway:
VLAN ID:
[ * ] Use DHCP for iSCSI target information
Target Name:
Target IP:
Target Port:
Boot LUN:
Press spacebar to change
[OK]
________________
[Cancel]
Chapter 2: Boot Agent Configuration
Advertisement
Table of Contents
