Table of Contents
Advertisement
2.2
Intel(R) iSCSI Remote Boot
The Intel(R) iSCSI Remote Boot provides hardware-based Ethernet card configurations.
To start the Intel(R) iSCSI Remote Boot and access the main screen:
1.
Turn on the system.
2.
During POST, press <Ctrl+D> when the following screen appears.
Intel(R) iSCSI Remote Boot version 3.0.84
Copyright(c) 2003-2014 Intel Corporation. All rights reserved.
Press ESC key to skip iSCSI boot initialization.
Press <Ctrl-D> to run setup...
3.
From the iSCSI Port Selection screen, use the Up/Down arrow key to select an
Ethernet device to configure and press <Enter>.
MAC:00E018060110 Dev:1563 Loc:1:0:0 BOOT:DISABLED
MAC:00E018060111 Dev:1563 Loc:1:0:1 BOOT:DISABLED
Select iSCSI Boot priority: P=PRIMARY S=SECONDARY D=DISABLED B=BLINK LED
•
Press <P> to set the selected item as the primary boot priority, press <S> to set the
selected item as the secondary boot priority, or press <D> to disable the selected item.
•
Press <B> to blink the LED of the selected item.
4.
From the iSCSI Port Configuration screen, use the Up/Down arrow key to select an
item and press <Enter>.
Copyright(c) 2003-2014 Intel Corporation. All rights reserved.
ASUS MCI-10G/X550-2T
Intel(R) iSCSI Remote Boot v3.0.84
iSCSI Port Selection
Intel(R) iSCSI Remote Boot v3.0.84
iSCSI Port Configuration
iSCSI Boot Configuration
iSCSI CHAP Configuration
Discard changes and Exit
Save changes and Exit
2-3
Advertisement
Table of Contents
