Installation
!
Warnings
Isolate mains before
removing PSU cover
1 Select interchangeable lens and
mount VARIO illuminator
VARIO is factory set and delivered with a
35˚ beam width. To alter to 10˚, simply
remove interchangeable holographic
diffuser (IHD). To alter to 60˚, replace with
other IHD supplied.
2 Mount PSU
Mount PSU on wall/flat surface with
glands facing down
3 Connect illuminator to PSU
VARIO PSU provides 24V DC
Wiring – six core cable
Red wire +
Black wire -
Installers can extend or reduce lead
length using appropriate cable and
weather proof box
2
www.rayteccctv.com
Mount PSU to
flat surface
Install in a well
ventilated area
2
3
Photocell
Cable
Breather
Gland
UK / Europe Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
1.5m
Do not continually
stare at lamp
1
!
CAUTION:
Red = +ve
Black = -ve
(polarity sensitive)