Download Print this page

Raytec VARIO PSU Installation & Setup Manual

Advertisement

Quick Links

Installation and Setup Guide for
the VARIO PSU
Designed to power all VARIO illuminators (including VARIO IP)
PSU-VAR-20W-1 (small)
PSU-VAR-100W-2 (large)
Contents
Page 2 - 3
Page 4
Page 5
Page 6
Page 7 - 8
PSU
Installation
Setup
VARIO Standard Bracketry
VARIO PSU Specifications
Troubleshooting
PSU-VAR-50W-2 (medium)
PSU-VAR-150W-3 (x-large)

Advertisement

loading

Summary of Contents for Raytec VARIO PSU

  • Page 1 Installation and Setup Guide for the VARIO PSU Designed to power all VARIO illuminators (including VARIO IP) PSU-VAR-20W-1 (small) PSU-VAR-50W-2 (medium) PSU-VAR-100W-2 (large) PSU-VAR-150W-3 (x-large) Contents Page 2 - 3 Installation Page 4 Setup Page 5 VARIO Standard Bracketry Page 6...
  • Page 2 Mount PSU on wall/flat surface with (polarity sensitive) glands facing down 3 Connect illuminator to PSU Photocell VARIO PSU provides 24V DC Wiring – six core cable Red wire + Black wire - Cable Installers can extend or reduce lead...
  • Page 3 4 PSU Connections Connect photocell following output/telemetry if required into ‘Fast Connect’ wiring terminal. Photocell following contact - White & Yellow wires Volt free output. Non polarity sensitive. Terminal 1 – white wire Terminal 2 – Yellow wire Telemetry input - Orange & Purple wires Volt free/dry contact or TTL input Terminal 3 –...
  • Page 4 Setup 1 Position illuminator Match illumination to Position illuminator adjacent to camera and point camera field of view towards scene (Optional night set-up for optimum image performance) Camera 2 Adjust vertical angle TARGET Reduces performance 3 Adjust horizontal angle Adjust horizontal angle via Adaptive Illumination (AI) if required (VARIO AI illuminators only) Light Camera...
  • Page 5 Standard Bracketry VARIO 2 series 52mm VARIO 4 series 56mm VARIO 8 series 53mm Other bracket options available – see specific illuminator instructions. See VARIO AI Installation instructions for VARIO AI bracketry options. UK / Europe Tel: +44 (0) 1670 520055 www.rayteccctv.com Americas Tel: +1 613 270 9990...
  • Page 6 PSU Specifications PSU-VAR-20W-1 PSU-VAR-50W-2 PSU-VAR-100W-2 PSU-VAR-150W-3 (small) (medium) (large) (x-large) 1 x VARIO 2 series 2 x VARIO 8 series or Illuminators 2 x VARIO 4 series 3 x VARIO 8 series Plus aux output (max 8w) 1 x VARIO 16 series 4 x VARIO 2 series * 4 x VARIO 4 series * 1 x VARIO 16 series*...
  • Page 7: Troubleshooting

    Step 3 Set-up Camera, lens and illumination • Check camera lens – fully open at night & set correctly • Check model number to Raytec performance specification to ensure required distance is achievable; - Check illuminator is set to max power - Check orientation of illuminator and ensure it is pointing in correct direction - Check angle of illuminator (Holographic lens) –...
  • Page 8 Model and serial number of PSU/ illuminator • Camera make and model If the Raytec lamp or remote control is still not delivering the required performance, please contact us for further assistance: Raytec Global Tel: +44 (0)1670 520055 Raytec Warranty Please register you VARIO PSU for its 3 year warranty by visiting www.rayteccctv.com/products/warranty-card...

This manual is also suitable for:

Psu-var-20w-1Psu-var-50w-2Psu-var-100w-2Psu-var-150w-3