Locations; Locations And Functions - JAI CV-A10CL-A70CL Operation Manual

4. Locations

4.1. Locations and functions

②
①
⑤
Lens mount
①
Flange back adjustment
②
1/4-20 UNC
③
Lens connector
④
D-SUB 9 pin connector
⑤
LED
⑥
BNC
⑦
Function keys
⑧
RJ-45
⑨
Holes for RJ-45
⑩
LED (ACT.)
⑪
LED (LINK)
⑫
Note 1) Use the provided C-mount adapter for C–mount lenses
Note 2) When an RJ-45 cable with thumbscrews is connected to the camera, please do not
excessively tighten screws by using a screwdriver. The RJ-45 receptacle on the
camera might be damaged. For security, the strength to tighten screws is less than
0.147 Newton meter (Nm). Tightening by hand is sufficient in order to achieve this.
CV-S3500E
②
③
⑥
⑦
⑫ ⑩
⑪
CS Mount (note1)
Screws for flange back adjustment
Camera mount hole
For auto iris (DC or Video)
For DC+12V,Video out & RS-232C
Power indication
Composite video output(NTSC or PAL)
For camera configuration
Ethernet connection (100BASE-T,10BASE-T)
Power over Ethernet
Holes for fixing screws of RJ-45 (note 2)
Network connection (ACT.)
Network connection (LINK)
Fig.1 Locations
- 6 -
④
⑧
⑨