Table of Contents
Advertisement
6. Connections
6.1. Power
Power to the CV-S3500E is supplied through the D-SUB 9 pin or the RJ-45 Ethernet interface. The
power consumption of the CV-S3500E is less than 4.2W.
D-SUB 9 pin
Pin1 Gnd
Pin2 +12V
L I N K ACT .
The PoE system in the CV-S3500E is Alternative A, which uses data communication lines as power
supply. For connection details, refer to section 5.2.
6.2. Video output (NTSC or PAL)
The CV-S3500E provides composite video and YC video for NTSC or PAL.
BNC output and D-SUB 9-pin output for composite video cannot be used at the same time.
D-SUB 9 pin
Pin3 Gnd
Pin4 NTSC or
PAL out
Pin6 Y out
Pin7 C out
NTSC or PAL output can be selected from the on-screen menu which can be activated by the
function keys on the back of the camera.
6.3. Ethernet connection
The CV-S3500E works as an IP network camera, providing JEPG, MPEG4 or H.264 motion video or
JPEG still pictures. Using a web browser, the camera can be configured for different applications.
POW E R / T R IG
U P
FUNC
D WN
O
V ID EO OU T
L I N K ACT .
10 BASE -T /
100 BASE -TX
6.3.1 MAC address and IP address
When connecting to a net work, please check MAC address and IP address.
MAC address
Indicated on the bottom of CV-S3500E
IP address
Set in accordance with the connected Network
DHCP can acquire appropriate IP address if DHCP function is set to ON.
The following table shows IP address default settings.
IP Address
Subnet Mask
Default Gateway
DHCP
CV-S3500E
PO W E R / T R IG
U P
FUNC
D WN
O
V ID EO OU T
POE
(Power over Ethernet)
10 BASE -T /
100 BASE -TX
PO W E R / T R IG
U P
FUNC
NTSC or PAL
putput
D WN
O
V ID EO OU T
L I N K ACT .
10 BASE -T /
100 BASE -TX
100BASE-T/10BASE-T
Item
Fig.5 Power supply
Fig.6 video output
Fig.7 Ethernet connection
Default
192.168.30.30
255.255.255.0
0.0.0.0 (not used)
OFF
- 9 -
Advertisement
Table of Contents
