ACIFINITY AI-CLT4 User Manual page 22

T-SERIES CONTROLLER
PROGRAMMING
ALARM SETTING
In this mode, you can set what temperature
the system's alarm will trigger by pressing
the up and down triangle buttons. When the
PROBE temperature reaches or exceeds
the ALARM temperature, the alarm will
activate. The alarm will only activate while
the controller is in ON, AUTO, or SMART
Mode so please remember to exit ALARM
Mode once the alarm has been set. When
the alarm is triggered, the fan will run at
max speed regardless of mode and will
make an audible beep every three seconds.
This will keep occurring until the temperature
drops below the ALARM temp or if any buttons
are pressed.The alarm can be disabled by
pressing the UP/DOWN button until the
ALARM temp says "OF"
FAHRENHEIT OR CELSIUS
The temperatures displayed can be set to Fahrenheit or Celsius scale by holding
the LEAF button until °F or °C is shown after the digits. All digits displayed will be
automatically converted to the designated scale.
22
PROBE
SETTING
o
F
ALARM
o
F
o
F