ACIFINITY AI-CLT4 User Manual page 21

T-SERIES CONTROLLER
PROGRAMMING
OFF MODE
In this mode, the fans are powered off
regardless of set temperature or set speed.
The backlight setting can be increased or
decreased by pressing the up or down
buttons while in this mode.
SMART MODE
This is the energy saving mode where the fans
will change speed depending on the
temperature. The SETTING temperature can
be designated by pressing the up and down
triangle buttons while in this mode. For every
4°F increment that the PROBE temperature is
below the SETTING temperature, the speed of
the fans will decrease by one level. This
increment can be changed to 2°F; please see
page 23 for more information. The fan speed
you designated in ON Mode will also be the
max speed the fan's can reach. This occurs
when the PROBE temperature reaches or
exceeds the SETTING temperature.
PROBE
SETTING
o
F
ALARM
o
F
PROBE
SETTING
o
F
ALARM
o
F
o
F
o
F
21