View Connected Devices - NETGEAR EX8000 User Manual

To enable or disable the Smart Connect feature:
1. Launch a web browser from a computer or mobile device that is connected to your extender network.
2. Log in to your extender:
• If you did not enable the One WiFi Name feature, enter www.mywifiext.net in the address field of
the browser.
• If you enabled the One WiFi Name feature, enter one of the following URLs:
- Windows-based computers. http://mywifiext
- Mac computers and iOS devices. http://mywifiext.local
- Android devices. http://<extender's IP address> (for example, http://192.168.1.3)
For more information about how to find your extender's IP address, see
Address
A login page displays.
3. Enter your admin email address and password and click the LOG IN button.
The Status page displays.
4.
If your browser displays the Menu icon
The extender menu displays.
5. Select Settings > Wireless.
The WiFi Settings page displays.
6. To enable the Smart Connect feature, select the Yes radio button.
Note For you to use this feature, the 2.4 GHz and 5 GHz networks must use the same
SSID and password.
7. To disable the Smart Connect feature, select the No radio button.
If you disable this feature, you can set a new SSID and password for the extender's 2.4 GHz and 5 GHz
networks in the Network Name (SSID) and WiFi Password fields on this page.
8. Click the SAVE button.
Your settings are saved.

View Connected Devices

You can view a list of devices that are connected to the extender network.
Nighthawk X6S AC3000 Tri-Band WiFi Range Extender
on page 61.
Extender Network Settings
, click it.
22
Find the Extender's IP