Chapter 6 Quick Start; Step 1 - Create A New Project; Step 2 - Add Source Program Files To The Project; Step 3 - Build The Project - Holtek HT46R47 Handbook

C h a p t e r 6
Quick Start
This chapter gives a brief description of using HT-IDE3000 to develop an application project.

Step 1 - Create a New Project

· Click on Project menu and select New command
· Enter your project name and select an MCU from the combo box
· Click OK button and the system will ask you to setup the mask options
· Setup all mask options and click Save button

Step 2 - Add Source Program Files to the Project

· Create your source files by using File/New command
· Write your program and save them with a file name, say TEST.ASM
· Click on Project menu and select Edit command
· An Edit Project dialog will ask you to add/delete files to/from the project
· Select a source file name, say TEST.ASM, and click Add button
· Click OK button after you setup all files in the project

Step 3 - Build the Project

· Click on Project menu and select Build command
· The system will assemble/compile all source files in the project
- If there are some errors in the programs, double click on the error message line and the sys-
tem will prompt you the position where the error happened.
- If all the program files are error free, the system will create a Task file and download to the
HT-ICE for debug.
· You may repeat this step before you finish debugging your programs

Step 4 - Programming the OTP Device

· Build the project for creating the .OTP file
· Click on Tools menu and select the HandyWriter command to program the OTP devices

Chapter 6 Quick Start

129
6