FES GEN2 14S User Manual page 9

FES BATTERY PACK GEN2 Version 1.18
3. Robust R2300 BMS version (2000W, 6.1kg), with maximum charging current 35A.
This is optional FES charger.
KOP602, KOP1001 and R2300 are modern programable fully automatic battery
chargers, which works only in combination with BMS which is inside of the battery pack.
We program each charger with suitable settings for FES GEN2 14S.
Those chargers stores data about charging times and Ah charged. This data may be
accessed for further analysis by manufacturer.
Required input voltage is 230V~ 50/60 Hz. Unfortunately is not available 110V
version of charger. If your country is using 110V grid, then you should use suitable
voltage step up transformer.
Before using the charger, check that the fuse on the grid is suitable. For
1200W charger it should be minimum 10A fuse. Always try to connect
charger directly to inlet, without extension cables and splitters if possible.
Each Battery pack must be charged separately.
If you ordered another pair of Battery packs, make sure that you
do not mix packs between the sets. The same two packs of one set
(first marked as A, second marked as B) must be always used in
pair!
Robust R2300 charger
Page 9 of 25
September 2017