Attach The Mounting Fixture - Planar Invitium Tk7 Operation Manual

Attach the Mounting Fixture

Use four 4 mm 0.7 pitch stainless steel screws of the appropriate length for a tight
fit. You need 4 mm of the screw's threads engaged in the Invitium's VESA plate for
proper support.
1 Install the mounting fixture. (Refer to the vendor documentation.)
Attach the Invitium to the fixture using the VESA panel on the back
2
of the Invitium.
If the VESA panel on the fixture has slotted upper screw holes, secure the top
two screws to the Invitium's VESA panel, and then slide the Invitium onto
the fixture.
If the holes are not slotted, have another person support the Invitium against
the fixture while you secure the screws.
I n s t a l l i n g t h e I n v i t i u m 7