Important Notes; Product Overview - Elecro Engineering Nano SPA Heater Installation & Operating Manual

Important Notes!

Thank you for purchasing the NANO Spa Heater manufactured in England
to the highest standards.
To ensure your new heater will give years of trouble free service please
carefully read the following instructions.
Incorrect installation will affect your warranty.
Do not discard this manual, please retain for future reference.

Product Overview

Thermal safety
re-set switch
Heater 'ON'
Indicator (red)
LH End fitting
Foot /Carrier – A
Fig 1.
NOTE unions for rigid pipe work not shown.
Temperature
Cut-out
point dial
Flow tube
Foot / Carrier—B
www.elecro.co.uk
set
Top cover
RH End Fitting
Flow switch
Hosetail Stepped
Connector
1¼" (32mm) or
1½" (38mm)
1