Table of Contents
Advertisement
The flow tube does not feel warm
Due to the high efficiency of your electric heater no warmth should be
detectable from the flow tube of the heater. The most likely causes of the
flow tube feeling warm are:-
Possible cause 1: The heater has been positioned in direct sunlight.
Possible cause 2: An air pocket is trapped inside the heater particularly if
the tank feels warmer at the highest point of the tank (as air rises).
The water entering my spa does not feel much warmer
The temperature gain of the water after it has passed through the heater
will be directly proportional to the volume of water being pumped in
relationship to the power output of the heater.
For example: A 6-kW heater, when connected to a 4,000 litre / hour
pump, will produce a lift in temperature of approximately 1.2°C (almost
undetectable to the human hand) however, as the water being heated is
re-circulated from a single body of water, the time required to heat it
remains unaffected by the volume of flow. A popular misconception is that
slowing down the flow rate will speed up the heating process.
RoHS Compliance Statement
Elecro Engineering Limited certify that our Electric Spa Heater Range
complies in accordance with RoHS Directive 2011/65/EU on the restriction
of hazardous substances.
Waste of Electrical / Electronic Equipment
This product complies with EU directive 2012/19/EU
Do Not dispose of this product as unsorted municipal waste.
8
This symbol on the product or on it's packaging indicates
that this product should not be treated as household
waste. Instead it should be handed over to the applicable
collection point for the recycling of electrical and
electronic equipment.
By ensuring this product is disposed of correctly you
will help prevent poten-tial negative consequences for
www.elecro.co.uk
Advertisement
Table of Contents
