Viewing The Signal Strength - Huawei ETS1160 Manual

Connecting the FWT to a Telephone
The FWT provides two telephone ports. They are in
parallel connection and use the same number.
To avoid the call effect from interfering by the
Note
wireless signal, place the telephone one meter
away from the FWT
Connecting the FWT to a PC
After purchasing the data service suite, you can use
data services by connecting the FWT to a PC, and

Viewing the Signal Strength

maintain the FWT on the PC. For details, consult
your local agent.
Viewing the Signal Strength
Power on the FWT and wait until some signal
strength indicators are on or until you can hear the
dial tone.
• If all signal strength indicators remain off for 5 minutes
and only the fault tone is heard. No signals can be
received.
• Turn the antenna but all signal LEDs still keep off. The
signal quality is very poor. If the dial tone can be heard
in some area, position the antenna towards it.
Indicators Signal Level Signal Strength
L1 and L2
remain off
No signal
0
5