Advertisement
Everest 300/700
Quick Start Guide
Guide de démarrage rapide
HE
Step 1: Pair and connect JBL Everest headphone to a source device
Step 2: Pause music or disengage the voice call from the source device
Step 3: Press "ShareMe 2.0" button, the white LED starts blinking. JBL Everest headphone
is ready to connect to the other headphone.
Step 4: Turn on the pairing function in the other headphone. Keep both headphones near
each other. The white LED stops flashing and remains lit after two headphones connect.
Step 5: Press the play button in the source device to share audio between two headphones.
Step 6: Press "ShareMe 2.0" button to turn off this feature. The white LED is off.
6
To charge battery
Connectors in Everest
right earcups
7
Adjust Volume
LED Status
Battery level is low
Charging battery
Battery is charged full
LED
behaviors
Advertisement
