Download Print this page

GE GSD570M Use And Care Manual page 4

Advertisement

How to ot)erate vour dishwasher
-l
Steam
Vent
Door Latch (unlocked)
Cycle Indicator Dial
,assssaa=s~
\
STEP 1. Load your dishwasher
with dishes, silverware, pots,
pans, bowls, etc., according to
instructions on pages 8 and 9.
STEP 2.
Add detergent to the
detergent dispenser. Make
sure the
Cycle Indicator dial is at
OFF
position before adding detergent.
(See pages 6 and 7.)
Use rinse aid agent to help prevent
spotting. Occasionally check to
insure rinse agent container is at
least half full. (See page 6.)
STEP 3.
Select Drying Option.
ENERGY
SAVER
B
HEATED
ORVING
HEATED DRYING.. Turns the
drying heater on for fast drying.
ENERGY SAVER(no-heat
drying). Turns the drying heater off
to save energy. Dishes will dry
naturally over a longer period
such
as overnight.
If you need your dishes sooner,
open the dishwasher door afler
the cycle is complete to reduce
the natural drying time.
Use of this option reduces the
electrical energy used by this
model approximately 7 % for
the NORMAL WASH cycle.
STEP 4.
Select the cycle and start
the dishwasher. See Cycle Selection
Hints at right.
If your dishwasher drains into a
food waste disposer, operate the
disposer until it is empty before
starting the dishwasher.
For NORMAL WASH cycle:
a. Latch the door.
,
Lkymg
OFF
ON
@
8
. LIGHT
WASH
Washng
RINSE
ONLY m I&m; nnmc
EtJ\.:
H
——
HEATEO
ORVING
L
I
b. Slowly
turn Cycle Indicator dial
to ON position to start the cycle.
Youwill hear the motor start. There
is a time delay between start-up and
water fill so you will not hear any
wash action right away.
To obtain the benefits of a complete
cycle, be careful that you do not
turn the dial any further than
necessary
to start the dishwasher.
For
LIGHT WMH cycle:
a.
Be sure door is unlatched.
b. Slowly turn Cycle Indicator dial
to LIGHT WASH position.
c. Latch door to start the cycle.
For RINSE ONLY cycle:
a.
Be sure door
is
unlatched.
b. Select ENERGY SAVER drying
option.
OFF
ON
,.@:.
~
HEATEO
OWING
I
*5R
c. Slowly turn Cycle Indicator
dial to RINSE ONLY position.
d. Latch door to start the cycle.
4
I

Advertisement

loading