Dimmable high color changing line voltage fixture (5 pages)
Summary of Contents for Boca Flasher LUMELINE
Page 1
This could result in permanent damage to both the fixture and the cables. Damage resulting from grasping cables and/or putting undue pressure on the cable connections will not be covered under the warranty! Do not attempt to install or use the LUMELINE fixture without reading the installation instructions and safety labels completely.
Page 2
Introduction: The Boca LUMELINE is a line voltage fixture that eliminates the need for secondary transformers, making installation contractor friendly. The housing is anodized aluminum with a durable finish making it weather and abrasion resistant. It is UL Listed for dry, damp or wet location (model dependent).
Page 3
Install security screw using supplied screw and driver. 3” Arc & 6” Arc Bracket Installation Screw Information: 1. Screws not provided by Boca Flasher. 2. Boca Flasher recommends wide washer flat head Philips #8 screw (not to exceed .418” in diameter).
Page 4
Installation Instructions LUMELINE coNNect fIxtuRes toGetheR aS Shown on joB SPeCIFIC drawIngS Rotate fixture to Connect Male and Female end caps in Cross-reference with see bottom and job specific drawing. order shown on job specific drawings. note each label. Push together until it locks.
Page 5
4. coNNect fIxtuRes to PoWeR 5. coNNect to A DIMMING systeM *note: These fixtures can dim on forward (leading) or reverse (trailing) phase dimmers. Boca Flasher does not recommend the use of a “Smart” or phase-adaptive dimming module. 6. ReMoVING fIxtuRes fRoM clIPs...
Need help?
Do you have a question about the LUMELINE and is the answer not in the manual?
Questions and answers