Advertisement
■ HDBaseT specifications
HDBaseT is used to transfer video signal and network data. HDBaseT transmitter equipment can be
connected directly to the projector using a network cable as the projector is equipped with a receiver.
●For video signals (HDMI cable is used for connection ①)
Output device
① Video signal is sent to the transmitter from an output device such as Blu-ray player.
② Transmitter then converts the video signal into HDBaseT signal and sends out.
③ Receiver receives the HDBaseT signal and converts to an HDMI signal and sends out.
④ Display device will display the HDMI signal.
●For network communications (Network cable is used for connection ①)
Network
① Network data is sent to the transmitter from a secured network.
② Transmitter then converts the network data into HDBaseT signal and sends out.
③ Receiver receives the HDBaseT signal and converts to a network data and sends out.
④ Network data from a display device can transmit in the same manner in reverse direction.
List of HDBaseT transmitters (TX) confirmed to work with the WUX6500
Manufacturer
Crestron
AMX
Kramer
※ 2
Extron
Gefen
Atlona
CYP
IDK
IMAGENICS
※1 When a certain input device is connected, the picture may not be displayed in intended resolution.
※2 Extron XTP is not supported.
※3 LAN transmission disabled when the projector is in Standby mode (Tx is incompatible with LPPF2 mode)
※4 Serial transmission disabled when the projector is in Standby mode.
Transmitter
Transmitter
Model Name
DM-TX-201C
DM-TX-401C
DX-TX
TP-581T
TP-582T
XTP T USW 103
GEF-HDCAT5-ELRPOL
AT-HDTX-RSNET
PU-507-KIT
HDC-TH100-C
CRO-DE20TX
Network cable
WUX6500
Network cable
Video
Audio
Yes
Yes
Yes
Yes
Yes
Yes
※ 1
Yes
Yes
Yes
Yes
No
No
Yes
Yes
※ 1
Yes
Yes
※ 1
Yes
Yes
Yes
Yes
Yes
Yes
WUX6500
Receiver
Display device
Receiver
Display device
LAN
Serial
Yes
Yes
Yes
Yes
Yes
No
※ 3
No
Yes
Yes
Yes
No
No
No
WUX6500 (11/14)
No
No
Yes
Yes
Yes
No
No
No
Yes
※ 4
※ 4
Advertisement
