Advertisement
● Analog PC input (1, 2)
Horizontal
Signal format
frequency
[KHz]
640×480
31.469
720×480
31.469
720×576
31.250
800×600
37.879
848×480
31.020
1024×768
48.363
1280×768
47.776
47.396
1280×800
49.702
49.306
1280×960
60.000
1280×1024
63.981
1366×768
47.712
1400×1050
64.744
65.317
1440×900
55.935
55.469
1600×900
60.000
1600×1200
75.000
1680×1050
64.674
65.290
1920×1080
56.250
67.500
1920×1200
74.038
Specifications in above charts are subject to change without notice.
Notes: If the analog PC signal of the dot clock is greater than 162MHz, the images are not projected correctly.
Use VGA cable with all pins connected. Images may not project properly if the correct VGA cable is not used.
USB video signal (only for still images)
Images that are stored in a USB memory can be projected as still images by inserting the USB
memory into the projector.
File type
JPEG
Format
Standard DCT method (Baseline)
Max. pixels
10912 x 8640
Only JPEG files can be read by the projector with maximum pixels of 10912 x 8640.
It also supports Standard DCT method (baseline) format. Optimized, progressive and reversible
methods are not supported.
Note that when JPEG still image is inputted, digital zoom operation from display menu will not be
supported.
Slideshow setting for video input via USB is done from the video setting menu; use USB file browser
to display the video input via USB.
Network video input (only for still images)
The projector will receive still images from a computer (when NMPJ in operation) via LAN network.
Still images are output to the projector by converting the image to the number of pixels of the LCOS
device used for the projector.
Vertical
Dot clock
frequency
[MHz]
[Hz]
59.940
25.175
59.940
27.000
50.000
27.000
60.317
40.000
60.000
33.750
60.004
65.000
59.870
79.500
59.995
68.250
59.810
83.500
59.910
71.000
60.000
108.000
60.020
108.000
59.790
85.500
59.948
101.000
59.978
121.750
59.887
106.500
59.901
88.750
60.000
108.000
60.000
162.000
59.883
119.000
59.954
146.250
50.000
148.500
60.000
148.500
59.950
154.000
● Component video input
Horizontal
Signal format
frequency
[KHz]
480i
15.734
480p
31.469
576i
15.625
576p
31.250
720p
37.500
45.000
1080i
28.125
33.750
1080p
56.250
67.500
1080PsF
27.000
28.125
33.750
Analog/digital PC signals in this specification refer to RGB
video signal. This is because signals that are outputted
from PC in most cases are in that format.
Component video/digital video signals in this specification
refer to color-difference signal because signals that are
outputted from video equipment in most cases are in that
format.
Please note that Composite video and S video signals are
not included.
Vertical
Dot clock
frequency
[MHz]
[Hz]
59.940
13.500
59.940
27.000
50.000
13.500
50.000
27.000
50.000
74.250
60.000
74.250
50.000
74.250
60.000
74.250
50.000
148.500
60.000
148.500
24.000
74.25
25.000
74.25
30.000
74.25
WUX6500 (10/14)
Advertisement
