Panasonic X300 User Manual page 25

Shift mode change
In text entry mode, you can change mode by pressing and holding
Multi tap
abc Abc ABC 123
Text entry mode change
In text entry mode, to switch T9 mode on/off, press
Auto capital change
Auto capital affects Abc and T9Abc
When the entry mode is changed to Abc or T9Abc, the first character is input as upper
case and subsequent letters as lower case.
When one of the following characters [. (Period) or ! or ? ] is input before a space, the
next character is input as upper case.

T9 Text Input:
Using this mode of text entry dramatically reduces the required number of key presses.
Press a key once for any letter you require on that key. The desired letter may not be
displayed. Continue pressing other keys until the end of a word is reached, then check
that the word has been typed correctly before continuing on to the next word. If the
combination of letters typed has produced a word which is not the one you require,
A
press repeatedly until the correct word is displayed. Then continue to the next
word.
Example of Text entry in T9 Mode
To type a new message, follow these steps:
1. At the beginning of a new message, press and hold
text, if necessary
C
2. Press to change letter case, if necessary
% % ( (
3. Press
Note that the displayed words change as you type. Always type to the end of the word
before editing.

T9 languages can be selected from T9 Input – see "T9
If the word you require is not in the internal dictionary, it should be entered using the
Multi tap mode.
Tegic
T9abc T9Abc
!
.
. "Call" is displayed
C
.
T9ABC 123
.
@
(Clear) to delete previous

Input" on page 35.
Basic Operations 23