Configuring A New Wap Account - Pirelli DISCUS DP-L10 User Manual

9 Chapter
Service Inbox
Your phone will sometimes receive some service message from the service
provider, an indication tone will have if received, and also
received
automatically in
content.
Settings
1. Profile
• Active settings
• Edit active settings
2. Security
Certificate List, select
3. Inbox Service
4. Image display
5. Cache
6. Cookies: select
9.1
Through this menu you can set a new service profile based on the parameters
provided by your service provider:
Setting's name
provider's
Homepage: this is the default WAP homepage specified by your provider
(e.g. 'http://wap.yahoo.com')
Connection
Proxy
'10.128.201.076
Port: the port number (e.g. '80')
Data
under WLAN coverage: this will allow highest connectivity speed.
Bearer
'wap.providername.it')
Access
Authentication type
Username: (normally empty, unless provided by the service provider)
Password: (normally empty, unless provided by the service provider)
84
" icon displayed on Idle, the service message will be saved
Service Inbox, enter
settings: Enter: Settings
OK key
On/Off or press

Configuring a new WAP account

can be set as desired (it is suggested you use the service
name).
type: this is specified by your provider (typically 'Proxy')
address: this is the proxy IP address for WAP service (e.g.
')
bearer: set GPRS if only GSM network is available, choose WLAN if
settings. Access point: this is the service access node (e.g.
point: access service (for ex. wap.providername.it)
(e.g. ' Normal ')
Service Inbox, you can view the message
> Security settings, you can find a
in order to display the
OK key to select Clear cookies.
"1 WAP message
lists.