Summary of Contents for Blackline Safety Loner 900
Page 1
Intrinsically Safe User Guide Mobile Worker Safety Device SureSafe™ Alert. Locate. Respond. Safety Monitoring confirmation light...
Page 3
RF Exposure Statement For body worn operation, Loner 900 has been tested and meets the FCC and IC guidelines for RF exposure when used with the Blackline GPS belt clip designated for Loner 900. Use with other accessories may not ensure compliance with FCC and IC guidelines for RF exposure.
It is important for you to be aware of the following precautions. DANGER Do not place the Loner 900 product in or near an open flame. WARNING To reduce the risk of ignition of a flammable atmosphere, batteries must only be charged in an area known to be nonflammable.
Page 7
Do Not operate Blackline products outside their specified operating temperature. Consult the specifications section. Do Not store Blackline products outside their specified storage temperature. Consult the specifications section. Do Not operate Blackline products outside their specified humidity rating. Consult the specifications section.
Web: Overview The Blackline Loner 900 dedicated safety device provides multi-layered safety for you as a mobile worker. This guide provides information that you will find helpful to comfortably operate your Loner 900 device. Loner 900 contains the following internal components:...
The Loner 900 and Bridge have been activated on a Loner Portal user account. n You are wearing the Loner 900 and the green SureSafe™ power light is on continuosly n Loner 900 is connected to a Loner Bridge.
Using Loner 900 Loner 900 Hardware Details Loner 900 is rugged and purpose-built for monitoring you as a mobile worker. Physical details are outlined below. Physical Feature Power Button & Powers Loner 900 and indicates monitoring status to the SureSafe...
Page 11
Indicator Light Array (red LED) Confirmation of alert (blue LED) Muster Alarm indicator (yellow LED) Acknowledge Button (push) SureSafe Power Button & Emergency Latch (pull) Indicator Light Charging Light (on bottom) Belt Clip Product Label Charging Port Removable Micro USB Charging Clip...
Micro USB Charging Jack on the charging clip and insert the other USB plug into wall charger. 3. Slide the charging clip onto Loner 900 using the guides to align the clip with the charging port on the device.
Loner Bridge until the Power Button Light Indicator is off. v If Loner 900 is plugged in to charge, it will automatically turn off to avoid false alerts. Loner 900 Green SureSafe Power Button Light Behaviour Loner 900 features a Power Button Indicator Light.
Loner Bridge cannot be used indoors due to obstruction of satellite communication signals. 3. Press the SureSafe Power button to turn on the Loner 900 device. The Loner 900 device’s internal vibration motor, beeper, and red visual indicators will annunci- ate the power on sequence.
6. Power off Loner Bridge only when no Loner 900 devices are connected to ensure that real-time monitoring of other employees is not inadvertently stopped. v The Loner 900 logo must face outward, away from your body for optimum GPS and fall impact detection performance.
Monitoring Center’s Confirmation of Alerts Loner 900 will activate a blue light on the left and right sides of the indicator light array when a monitoring center has acknowledged an alarm sent by the Loner 900. Once the monitoring center has resolved the alarm, the light will shut off. If an alarm is generated while the confirmation light is on, the light will reset (turn off ) until the new alarm has been acknowledged.
(a silent emergency), perform the following: 1. Push and hold the acknowledge button for 5 seconds. Loner 900 will vibrate for 3 seconds, pause and then vibrate for 2 more seconds. A Silent Emergency Message will be sent to monitoring personnel. Hold the acknowl- edge button until the second vibration pulse stops.
Muster Alarm Light A yellow LED on either side of the Loner 900 will light up if you are required to return to muster or if Loner Bridge has received a text message at the Bridge that requires action. About Fall Impact Detection Loner 900 is constantly monitoring your motion for falls.
Low Battery Notification Loner 900 monitors the battery level of the device. If the battery level drops below 20% of battery capacity (configurable), a Low Battery Alert will be sent to monitoring personnel and Loner 900 will annunciate the low battery alarm pattern.
Troubleshooting Troubleshooting the Use of Loner 900 Symptom Cause Solutions Green Loner 900 is not con- Ensure Loner Bridge is turned On SureSafe nected to the Loner (It may take up to 2 minutes after power light is Portal via Loner Bridge power-on to connect.);...
Specifications Specifications for Loner 900 Size & Weight Mobile Messaging Methods Size: 63 mm W x 107 mm L x 22 mm D (2.48” W x 4.21” L x 0.87” D) Email, text message (SMS) Weight: 137 g (4.8 oz)
Loner 900 Care Consideration Regarding Use and Storage of Loner 900 Loner 900 meets IP65 ingress protection ensuring that under normal operation no dirt or water can enter the device. Storage temperature range: -30 to 75 ° C (-22 to 167° F) Operating temperature: -20 to 55°...
Page 23
Loner 900 Manual Content Intrinsically Safe This device is certified Intrinsically Safe for use in Class I, Division 1. Groups A-D and Class II, Division 1, Groups E-G hazardous (classified) locations. Sécurité intrinsèque Le dispositive Loner IS de Blackline est un UL 913-cer- tifié...
Need help?
Do you have a question about the Loner 900 and is the answer not in the manual?
Questions and answers