Pioneer Elite SC-07 Operating Instructions Manual page 36

Troubleshooting (Continued)
Reverb characteristics graph cannot be printed
Cause:
It is not possible to print reverb characteristics graphs displayed in the "ALL"
mode.
Print after selecting an individual channel or frequency graph.
Some functions in application operation cannot be used
Cause:
You may not properly use the application software not corresponding to your
receiver.
Check the model number of your receiver and use the application software corresponding to it.
The receiver causes a malfunction when it is connected to the PC with a RS-232C
cable
Cause:
When the receiver is connected to your PC with a RS-232C cable, the power of
the receiver may be automatically switched on when you operate the PC.
Unplug the cable when not in use.
36
All display
Continue