Advertisement
Quick Links
GETTING
CONNECTED
Installation instructions for your
NBN Modem TG799
This guide is designed to help you get started with your new
modem. It relates to services being delivered over NBN FTTN
connections. Please make sure you keep it in a safe place, as you
may find you need to refer to it again at a later date.
Advertisement
Related Manuals for NBN TG799
Summary of Contents for NBN TG799
-
Page 1: Getting Connected
NBN Modem TG799 This guide is designed to help you get started with your new modem. It relates to services being delivered over NBN FTTN connections. Please make sure you keep it in a safe place, as you may find you need to refer to it again at a later date. - Page 2 YOU START In most cases an NBN technician will not need access to your premises in order to connect you to the NBN. If access is required, then one of our staff members will contact you to arrange a suitable time.
- Page 3 CONTENTS 01. NBN Modem 02. WAN Ethernet cable (white with red ends) 03. LAN Ethernet cable (white with yellow ends) 04. Telephone cables (grey) x 3 05. Power supply adaptor and cable 06. Wi-Fi Information label (sample)
- Page 4 LIGHTS ON THE NBN MODEM Light Definition Function Off – No power Status Status Indicator Green Solid – Normal operation (Status has no other button Green Flashing – Device starting up functionality) Red – No internet connection Off – No network connection Wide Area Network Green Solid –...
- Page 5 BUTTONS ON THE NBN MODEM Button Definition Function Reset Reset Button When pressed for more than seven seconds it will reset the modem to its factory settings. Any configuration changes you have made previously will be lost. Power Switch To turn the modem on or off WPS –...
- Page 6 SOCKETS ON THE NBN MODEM PSTN Ports Power Connect your data devices (PC, laptop, smart TV) to these Connect the Power Ethernet ports. Supply Adaptor cable here. Phone 1 and 2 Connect your This socket is used to telephone(s) or home...
- Page 7 Plug the Power Supply Adaptor cable into the NBN modem’s power inlet on the back of the device. Plug a telephone lead into the grey port on the NBN modem and then plug it into the wall socket. Then, plug the power adaptor into a power socket, turn it on, and push the ON/OFF button to turn the modem on.