Adjusting The Brightness Of The Display - Pioneer Elite VSX-21 Operating Instructions Manual

Adjusting bass and treble (tone control)
Use BASS (+/–) or TREBLE (+/–) to adjust the low and high frequencies.
TREBLE +/–
BASS +/–

Adjusting the brightness of the display

Use FL DIMMER to adjust the brightness of the fluorescent display.
RECEIVER TV
FQ
+
ENTER
–
FQ
VOL VOL
CHANNEL
MULTI CONTROL
DVD/LD TV/SAT CD
VCR 1 TUNER
TV CONTROL
VCR 2 RECEIVER MD/TAPE
DSP MODE MIDNIGHT
1 2 3 4
CH.SELECT
TEST TONE ATT SIG.SELECT
5 6 8
7
CN.LEVEL
EFFECT
9 0 +10
MEMU
CLASS TV/VCR
FUNCTION DIRECT FL DIMMER
COMMANDER
MODE CHECK SET UP
Î
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
Press BASS (+/–) to adjust the low frequencies.
SIGNAL
SELECT
ANALOG
Press TREBLE (+/–) to adjust the high frequencies.
SIGNAL
SELECT
ANALOG
memo
• The tone control can be adjusted in a range of ±6.
• Pressing + and – simultaneously restores the setting to 0.
• In cases described below, the tone control cannot be adjusted.
1 Dolby/DTS mode is ON.
2 DSP mode is ON.
3 DVD 5.1ch input is selected.
Press FL DIMMER.
Four levels of brightness ranging from very dim to very bright can be
selected. Each press changes the brightness of the display. When rotating
through the options, the default brightness can also be selected.
memo
In standby, pressing STANDBY/ON while holding down the
returns the display to the default brightness.
FL DIMMER
Other Operations
A
SP
dB
SP A
dB
/DTS button
41
<ARB7181>