Bosch ARD-AYZ12 Installation Manual page 6

6 en | Installation Manual ARD-AYZ12
Figure 1 Removing the Top Cover
The figure obove shows the front view of the ARD-AYZ12 Long-
Range Reader.
When installing the reader, you must remove the snap-off cover
to access the screw holes. The reader must be mounted with
the appropriate screws (not supplied), as described in the
template provided.
Installing the unit on metal surfaces will reduce the read range
considerably, to decrease the affect of the metal surface use
BOSCH's ARD-MPZ02 Spacer (sold separately) as described in
the image below for a max range of 43 cm (17 inch) - refer to
Figure 2.
| V 1.2 | 2009.09 Bosch Sicherheitssyteme GmbH