To Scan Quickly Through Tracks On A Disc - Pioneer PD-F1009 Operating Instructions Manual

VARIOUS OPERATIONS
<Programming a pause (remote control only)>
(Pause program)
If you press 8 at step
4
press 8, "PA" appears in the display instead of the disc number.
• For example, when making a program for recording both sides
of a cassette tape, press 8 to insert a pause after programming
the tracks for one side. After turning the tape over, press 8 to
resume recording.
Notes!!
• You cannot program a pause as the first step, nor program
two pauses in a row.
• When you program a pause, it counts as 1 step and
reduces the total number of tracks you can program.
• To erase a program...
Press 7 twice during playback (or once in stop mode). You can
also erase the program by pressing MODE, RANDOM,
PREVIOUS, or SINGLE LOADER PL1AY in either play or stop
mode (or by pressing BEST in stop mode).
• To cancel a program step
In stop mode, each time you press CLEAR, the last step in the
program is erased.
• If a programmed disc is missing or inserted backwards during
program play, "NO DISC" appears in the display, the step is
automatically erased, and playback proceeds to the next step.
• Program contents are stored in memory even when the
power is turned off.
• Press the DISPLAY twice to check the number of steps that
have been programmed.
DISC TRACK
PGM
Notes!!
5
• If step is carried out before the accumulated time is
displayed, the program play starts and the time is not displayed.
• When UNLOAD is pressed while a program has been entered,
the disc for the 1st program step comes on the center position
and the hood opens.
• The display is not shown if the total time of the program is 100
minutes or more.
16
HI-LITE
, you can program a pause. When you
MIN SEC
This indicates the number of
programmed steps.
HI-LITE PREVIOUS BEST
REPEAT MODE PROGRAM CLEAR
1 2 3 DISPLAY
4 5 6
7 8 9
DISC 0 TRACK
– DISC +
1 ¡ 4 ¢
7 8 3
RANDOM
3
To scan quickly through tracks on a
disc (HI-LITE scan)
• The operation is available only from the remote control unit.
This function plays a 10 second portion located 1 minute from the
start of each track on all the discs in the current play mode.
<Disc scan>
HI-LITE
Press once
The "DISC" and "SCAN" indicator blinks.
<Track scan>
HI-LITE
Press twice
The "SCAN" indicator blinks.
<Program scan> Press HI-LITE during
HI-LITE
Press once
The "SCAN" indicator blinks.
<Best selection memory scan>
HI-LITE
Press once
The "SCAN" indicator blinks.
<To return to normal playback>
3
Press HI-LITE during
either play or stop mode.
• The unit plays a 10 second
portion located 1 minute into the
first track of each CD, starting
from the first CD.
Press HI-LITE twice during
either play or stop mode.
• The unit plays a 10 second
portion located 1 minute into
each track of each CD, starting
from the first CD.
program mode.
• The unit plays a 10 second
portion located 1 minute into
each track in the program.
Press HI-LITE during best
selection memory play-
back.
• The unit plays a 10 second
portion located 1 minute into
each track in the best selection
memory.
Press 3 (or 6) when you
reach the track you want
to hear.
HI-LITE scan is canceled
and normal play resumes.
• To cancel HI-LITE scan, press 7.