16. Do not use vacuum without filter bag and/or filters in place. 33. Use a SEBO power head only in combination with a SEBO 17. Turn off all machine controls before unplugging. vacuum cleaner.
Page 4
It can be easily carried using its side handle or the optional shoulder strap attachment. Manual and Automatic Brush Shut Off – The DART can clean delicate rugs or hard floors with straight suction because the A Flat-to-the-floor 6-inch Profile –...
HEPA filters. Changing Bags is Easy and Clean – SEBO filter bags can be changed in just a few seconds, and a hygiene cap keeps dust sealed inside during removal and disposal.
Page 6
OPTIONAL ATTACHMENTS, ACCESSORIES, BAGS & FILTERS In addition to the standard on-board tools, a variety of optional SEBO Ultra filter bags can be purchased in boxes of eight. SEBO attachments are available. The 9-foot extension hose (extends bags, filters and accessories are reasonably priced and widely suction hoses) and the 20-inch extension wand are very popular available.
IDENTIFICATION OF PARTS 1. Handle grip 2. Upper cable hook 3. On/Off switch, suction control slider 4. Power cable 5. Handle Assembly 6. Hose 7. Bag full indicator 8. Filter bag cover 9. Filter bag housing 10. Filter bag housing release latch 11.
When possible, consult the materials supplied by your flooring manufacturer for information on proper upkeep and cleaning. To ensure that your new SEBO vacuum cleaner is compatible with your floor, please test the vacuum cleaner on each type of flooring surface in a small inconspicuous area to determine if any...
Page 9
“clicks” into the OFF position before unplugging the power cord. Detachable Suction Unit - Figure 9 When detached from the power head, or floor tool, the DART transforms itself into a lightweight, powerful suction unit, which can be carried around using its comfortable carrying handle (figure 9).
Page 10
POWER HEAD MAINTENANCE Always unplug vacuum from outlet before dismantling any part of the machine! To remove the power head, switch off the power and unplug the vacuum. Then, press the tool release button (12) and pull the vacuum out of the neck. Removing the Brush Roller - Figure 12 To remove the brush roller, press the button marked “PRESS”...
VACUUM MAINTENANCE Always unplug vacuum from outlet before dismantling any part of machine! When the “bag full” indicator (7) displays, airflow is reduced due to a full filter bag, dirty filters, or a clog. If the filter bag is empty and the filters are clean, you may have a clog.
CLOG REMOVAL Always unplug vacuum from outlet before removing any clogs! Clogs in the Hose - Figures 21, 22, 23 & 24 Check for suction at the end of the hose (6) by pulling the hose handle (19) out of the suction opening (18).
Page 13
TROUBLE-SHOOTING GUIDE Always unplug vacuum from outlet before dismantling any part of the machine! PROBLEM REASON SOLUTION Does not turn on 1. Not plugged into working outlet. 1. Use another outlet. 2. Cord worn, cut or broken. 2. Replace cord. 3.
Page 14
ADDITIONAL TROUBLE-SHOOTING GUIDE FOR POWER HEAD Always disconnect the power head before dismantling any part of the machine! PROBLEM REASON SOLUTION Power head does 1. Not plugged into good outlet. 1. Use another outlet. not turn on 2. The switch on the power head 2.
Page 15
DART Bag Housing with Handle #9855AM DART Arctic White (White/Dark Blue) 9855AM Arctic White Machine (White/Dark Blue) Pos. Part # Description 1 7002GS Air duct 2 7064 Internal wiring ET 3 7070 Internal cable 4 01016ER Screw STS 4x16 - T20...
Need help?
Do you have a question about the DART and is the answer not in the manual?
Questions and answers