Charge The Battery - Motorola MOTO RAZR V3m User Manual

charge the battery

New batteries are
not fully charged.
Plug the battery
charger into your
phone and an
electrical outlet.
Your phone might
take several seconds to start charging the
battery.
If you are charging your phone while it is off,
your phone displays Charge Complete when
finished. If you are charging your phone while
it is on, it displays a temporary charge
complete message, and the battery symbol
stops flashing when finished.
Tip: Relax, you can't overcharge your battery.
It will perform best after you fully charge and
discharge it a few times.
You can charge your battery by
connecting a cable from your
phone's mini-USB port to a USB
port on a computer. Both your
phone and the computer must be turned on,
and your computer must have the correct
software drivers installed. Cables and
software drivers are available in Motorola
Original data kits, sold separately.
conserve battery charge
Using certain features can quickly deplete
your battery's charge. These features can
include downloading music, using the
camera, replaying video clips, and using
Bluetooth® wireless connections.
You can conserve your battery's charge by
doing the following:
• Turn Bluetooth power off when not in
use (see page 58).
essentials 13