Table of Contents
Advertisement
T R O U B L E S H O O T I N G
ERROR CODE
ERR1
ERR2
ERR3
ERR4
ERR5
ERR6
CAUSE & SOLUTION
Signal is too weak.
Measure target locations that have stronger reflecting surfaces.
Signal is too strong.
Measure target locations that have weaker reflecting surfaces.
Battery voltage too low.
Replace battery.
Beyond working temperature.
Carry out measurement with the meter in the specified scope.
Improper measurement in pythagorean mode.
Re-measure and ensure the length of the hypotenuse is longer
than that of the right side.
Memory damage.
Please contact the supplier.
17
Advertisement
Table of Contents
