Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Powerline 3D HYBRID
Summary of Contents for Powerline 3D HYBRID
- Page 1 3D HYRBID Multi-line Laser INST R U CT I O N M AN UAL...
- Page 2 SAFETY Please read this instruction manual before Do not disassemble the instrument or operating this product. Please store this attempt to perform any internal servicing instruction manual in the carry case for as this will void your warranty. No user future reference.
-
Page 3: Item Checklist
ITEM CHECKLIST Please ensure the following items are included with your laser. If anything is missing please contact your retailer. Detector and clamp Wall mount Carry case Laser glasses INCHES Power adaptor Batteries Laser target Powerline 3D HYBRID... -
Page 4: Product Overview
PRODUCT OVERVIEW Green horizontal laser port (x1) Control panel Power / locking switch Red vertical laser ports (x2) -
Page 5: Control Panel
CONTROL PANEL Lock indicator Pulse mode indicator Battery indicator PULSE Pulse mode Line mode... - Page 6 POWERING YOUR LASER POWER ADAPTOR BATTERIES The 3D HYBRID can also be The 3D HYBRID can be powered by powered using the supplied power four AA alkaline batteries or Ni-Mh adaptor. rechargeable batteries. Please note: only the official power Please note: rechargeable batteries...
-
Page 7: Setup And Operation
SET-UP AND OPERATION ‣ To turn the unit on, slide the power ‣ Select a place as close as practical switch to “on” position. Self levelling to the work site. Ensure the location will commence and the 360° horizontal is clear of traffic. ‣... - Page 8 DETECTOR CONTROL PANEL Laser sensor Direction arrows On/off switch Power indicator Sound indicator Sound on / off Bubble vial...
-
Page 9: Using Your Detector
USING YOUR DETECTOR ‣ Press the pulse button on the control panel on top of the laser to enter into pulse mode. ‣ Switch the detector on and move it into the path of the laser beam. ‣ Hold the detector upright for horizontal beams. - Page 10 MAGNETIC WALL MOUNT Screw fixing point Ceiling track clamp Laser mount Screw fixing point...
- Page 11 USING THE MAGNETIC WALL MOUNT MAGNETIC / SCREW MOUNTING ‣ The magnetic laser mount front section can be directly attached to a metal surface. ‣ The mount can also be screwed into a wooden surface.
- Page 12 SCREW MOUNTING WITH HEIGHT ADJUSTMENT ‣ Attach the two magnetic backs together with the screw fixing point upright. ‣ The mount can now be screwed into a wooden surface. ‣ Carefully slide the magnetic laser mount front section up or down to adjust the laser height as required.
-
Page 13: Care And Maintenance
‣ Always turn the on/off lock to “off” lint-free cloth. when transporting the unit. ‣ Whenever possible, store the instrument in a dry, shady location. ‣ The 3D HYBRID should be calibrated every 6 months, if ongoing accurate levelling is required or an impact has occurred. -
Page 14: Warranty
WARRANTY The Powerline 3D HYBRID comes with a 3 30 Day Free Service year manufacturers warranty. If your laser is out of calibration within Our goods come with guarantees that the first 30 days of purchase you are cannot be excluded under the Australian entitled to a free calibration adjustment. -
Page 15: Specifications
SPECIFICATIONS Specifications Powerline 3D HYBRID Product code 50064 Warranty 3 Years Accuracy ±1.5mm at 10m Range 60m (with detector) Levelling range ±4° Laser class 2 Red / 3 Green Battery life 8 hours Battery type 4x AA Vertical lines Horizontal lines... - Page 16 Available from www.potters.co.nz 0800 POTTERS | info@potters.co.nz Auckland, Wellington + Christchurch...
Need help?
Do you have a question about the 3D HYBRID and is the answer not in the manual?
Questions and answers