Samsung Galaxy S4 User Manual page 107

Important! Neither device must be in Lock mode or displaying
the Lock screen. They must both be active and
unlocked. It is recommended that the target device
be on the Home screen.
6. Place the two active NFC-enabled devices back to back
to begin.
If the Touch to beam screen does not appear on the
source device:
• Pull them apart.
• Verify the image is visible in the preview window on the source
device (providing the file).
• Place them together again.
7. From the Touch to beam screen, touch the reduced
image preview to begin the transfer. After a few
seconds (depending on file size) the recipient will then
see the transferred file displayed on their screen.
101
Taking a Screen Shot
Also known as a screen capture, this feature allows you to
mimic the print screen function on most computers.
1. From a Home screen, touch
My device tab
My device My device
My device My device
Note: At least one feature must be activated before Palm
motion can be activated.
2. Touch the ON/OFF button next a feature to turn it
ON .
3. With the current screen showing the desired image, in
a single motion, place the side of your palm along the
one side of the device and then slowly swipe it in the
opposite direction over the screen.
Apps Settings
Motions and gestures.