Indicator
Name
Adaptive Cruise
Control (ACC)
with Low Speed
Follow (LSF)
*
Indicator
(Amber)
*
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
On/Blinking
Comes on for a few seconds when
●
you turn the ignition switch to ON
(
w
*1
, then goes off.
Comes on if there is a problem
●
with ACC with LSF
*
.
Comes on if the ACC with LSF
●
deactivated temporarily after the
battery has been disconnected,
then re-connected.
Comes on if there is a problem
●
with ACC with LSF
*
.
Indicator may comes on
●
temporarily when the Maximum
Load Limit is exceeded.
ACC with LSF
*
has been
●
automatically canceled.
Explanation
Comes on while driving - Have your
●
vehicle checked by a dealer.
*
is
Drive a short distance at more than 12
●
mph (20 km/h). The indicator should go
off. If it does not, have your vehicle
checked by a dealer.
Make sure the total load is within the
●
Maximum Load Limit.
2 Maximum Load Limit P. 431
Stays on constantly - Have your vehicle
●
checked by a dealer.
uuIndicatorsu
Message
*
—
Continued
97